RF Recorder

  1. Test & Measurement
  2. RF Recorder
RP-6500 - Recorder x 1 CH (6 GHz)

RP-6500 - Recorder x 1 CH (6 GHz)

Explore the RP-6500, Averna's high-performance wideband RF record and playback system. Designed for GNSS, SATCOM, and wireless protocol applications, it offers 500 MHz real-time bandwidth, multi-constellation GNSS simulation, and intuitive RF Studio software for professionals in product design, validation, and research.
RP-6500-Front_PXI-1092_with-shadow.png
/
Setup Diagram.png
/
The GNSS Spectrum.png
/
Easily monitor up to 4 channels.png
/
  • RP-6500-Front_PXI-1092_with-shadow.png
  • Setup Diagram.png
  • The GNSS Spectrum.png
  • Easily monitor up to 4 channels.png
DETAIL

HIGHLIGHTS

  • Averna’s RP-6500 is an all-in-one RF Record & Playback Solution with Real-Time GNSS Simulation and SATCOM signal generator, designed to support advanced Satellite Navigation applications.
  • Leveraging Averna’s RF Studio the RP-6500 enables wideband RF record and playback, up to 500 MHz, across frequencies from 9 kHz to 6 GHz.
 

Need an All-In-One Solution to Simulate, Record & Playback RF Signals?

RF Studio 是專為這些需求設計的智慧化解決方案
 
Advance your Satellite Navigation projects with the Averna RP-6500 Wideband Record and Playback platform. The RP-6500 can record and playback up to 500 MHz of RF spectrum from 9 kHz to 6 GHz, as well as simulate all common GNSS signals (BeiDou, Galileo, GLONASS, GPS, and QZSS). The system can also generate satellite communications signals (DVB-S and DVB-S2), making the RP-6500 the ideal platform to cover all your needs, present and future. The Averna RF Studio user interface provides easy configuration, file management, and visualization tools. 
 

Multi-Constellation GNSS Simulation, Record and Playback

Modern GNSS systems often utilize multiple frequencies in a single constellation. The RP-6500 enables wide bandwidth recording, covering all the most common GNSS bands, and allowing multiple constellations to be captured at one time. The unbeatable combination of a real-world RF record & playback and a real-time GNSS Simulator covers all your design validation needs fast and cost effectively. Designed for GNSS-specific signal conditioning, the system includes a bias tee, amplifier & attenuation for use off-the-shelf with GNSS antenna solutions.
 

RF Studio User Interface

Preloaded with RF Studio, a state-of-the-art workflow tool, the RP-6500 Series lets you quickly set up your recordings, add contextual data, visualize weak signals, and analyze your collected RF environments to validate and fine-tune your designs and products.


RP-6500 Series Features

  • Easy to use RF Studio user interface
  • 500 MHz instantaneous bandwidth
  • Covers most common wireless protocols from 9 kHz to 6 GH
  • Multi-constellation and multi-frequency GNSS Simulator
  • Supports Satcom protocols for Satellite Set-Top Box testing
  • SSD storage @ 32TB, up to ~16.6 hrs
  • High dynamic range (14 bits, > 80 dB)
  • Form factor allows rack mounting or portability
  • Time-synchronized capture of RF, signals, and messages

IMPORTANT LEGAL NOTE: Every country has different laws governing the transmission and reception and/or recording of radio signals. Users are solely responsible for using their RP-6500 in compliance with all local and applicable laws and regulations governing the transmission and reception and/or recording of radio signals. Averna Technologies Inc. does not accept liability for such use of our products. Averna recommends that you determine what licenses may be required and what restrictions may apply prior to use.
 

PR-6500 Datasheet Download →
 
 

Averna Record & Playback Comparison Chart

Back